It compiles, but aborts immediately if you try to run it.
I didn't include ldt.c; I'm not sure how the LDT is used on AMD64. It can be
added later if necessary.
While doing this, did some 64-bit cleanness fixes:
- Added necessary intermediate casts to ULong to avoid warnings when converting
ThreadId to void* and vice versa, in vg_scheduler.c.
- Fixed VALGRIND_NON_SIMD_CALL[0123] to use 'long' as the return type.
- Fixed VALGRIND_PRINTF{,BACKTRACE} to use unsigned longs instead of unsigned
ints, as needed.
- Converted some offsets in vg_symtab2.h from "Int" to "OffT".
- Made strlen, strncat, etc, use SizeT instead of 'unsigned int' for the length
parameter.
- Couple of other minor things.
I had to insert some "#ifdef __amd64__" and "#ifndef __amd64__" guards in
places. In particular, in vg_mylibc.c, some of our syscall wrappers aren't
appropriate for AMD64 because the syscall numbering is a bit different in
places. This difference will have to be abstracted out somehow.
Also rewrote the sys_fcntl and sys_fcntl64 wrappers, as required for AMD64.
Also moved the ipc wrapper into x86, since it's not applicable for
AMD64. However, it is applicable (I think) for ARM, so it would be nice
to work out a way to share syscall wrappers between some, but not all,
archs. Hmm. Also now using the real IPC constants rather than magic
numbers in the wrapper.
Other non-AMD64-related fixes:
- ARM: fixed syscall table by accounting for the fact that syscall
numbers don't start at 0, but rather at 0x900000.
- Converted a few places to use ThreadId instead of 'int' or 'Int' for
thread IDs.
- Added both AMD64 and ARM (which I'd forgotten) entries to valgrind.spec.in.
- Tweaked comments in various places.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3136
run, though. There are lots of stubs to be filled in. (The asm ones currently
just have "swi" in them, which seems to cause seg faults.)
Also, some of the macros are decided dubious, especially:
ARCH_* are bogus
SYSCALL_RET is bogus
PLATFORM_SET_SYSCALL_RESULT is bogus
not sure about SET_SYSCALL_RETVAL
FIRST_STACK_FRAME et al -- bogus?
VG_MAX_JUMPS ?
And in stage2.lds, the 0x8048000 is almost certainly wrong
This required some tweakings of the core:
- some of the vki_*.h kernel types were fixed up
- had to disable the AM_PROG_CC_C_O macro in configure.in, because automake
(autoconf?) didn't like it...
- some "#ifdef __x86__" guards were introduced, for nasty x86 things I don't
yet know how to factor out (trampoline page muck, sysinfo page muck).
- fixed a minor stupidity in vg_proxylwp.c.
- moved the ptrace wrapper into the x86-linux part
- had to change the intercept mangling scheme, to use 'J' instead of '$' as the
escape char because GCC didn't like '$'. This is all very dubious, and only
works because none of our intercepted symbols contains a 'J'. To be fixed up
ASAP.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3120
- Added a hacky mechanism which prevents the regtest script from entering
directories for other architectures. (Eg. when running on x86/, it won't enter
a ppc/ subdir.)
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3045
which caused the test to be skipped if the CPU type wasn't appropriate,
with a "prereq" line, which specifies a command that must succeed before
the test is run.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3041
- Change regtest script to print a message if a test is skipped due to the cpu
being of the wrong type.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2803
- Rewrote tests/cputest.c so that it can apply to different kinds of
processors. The idea being that any arch-specific tests have a cpu_test:
label in their .vgtest file, so they'll only get executed if the right
machine is being used.
- Rewrote a bunch of .vgtest files accordingly.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2802
Problem was that the malloc-replacing tools (memcheck, addrcheck, massif,
helgrind) would assert if a too-big malloc was attempted. Now they return 0 to
the client. I also cleaned up the code handling heap-block-metadata in Massif
and Addrcheck/Memcheck a little.
This exposed a nasty bug in VG_(client_alloc)() which wasn't checking if
find_map_space() was succeeding before attempting an mmap(). Before I added
the check, very big mallocs (eg 2GB) for Addrcheck were overwriting the client
space at address 0 and causing crashes.
Added a regtest to all the affected skins for this.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2462
- If no tool is specified, V now gives a short message and a list of
available tools. This was meant to happen previously, but a bug prevented
it from working properly; it gave the usage message instead.
- If a bad option is given, V now gives a short message rather than the full
--help. This make V consistent with all other programs I looked at.
- Now returning 0 when you do 'valgrind --help' and 'valgrind --version'
as other programs do.
- Removed VG_(startup_logging)() and VG_(shutdown_logging)() as they were
empty and have been for a long time (always?).
- Added various tests for these scenarios. Had to change the regtest
script slightly to allow for malformed command lines.
This addresses bug (wishlist) #82999.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2418
created by the test. Added appropriate lines to the Cachegrind and Massif
tests. Should prevent large numbers of files clogging up directories.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2372
This patch adds translation tests for most of the basic x86 instructions and
fixes a few missing/broken instructions to work properly.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2242
Patch to improve SSE/SS2 support
This patch should implement most of the missing SSE/SSE2 opcodes. About
the only ones it doesn't do are the MASKMOVxxx ones as they are quite
horrible and involved an implicit reference to EDI so I need to think
about them a bit more.
The patch also includes a set of tests for the MMX/SSE/SSE2 opcodes to
validate that they have the same effect under valgrind as they do when
run normally. In one or two cases this wasn't actually the case even
for some of the implemented opcodes, so I fixed those as well ;-)
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2202
Valgrind's dependency on the dynamic linker for getting started, and
instead takes things into its own hands.
This checkin doesn't add much in the way of new functionality, but it
is the basis for all future work on Valgrind. It allows us much more
flexibility in implementation, and well as increasing the reliability
of Valgrind by protecting it more from its clients.
This patch requires some changes to tools to update them to the changes
in the tool API, but they are straightforward. See the posting "Heads
up: Full Virtualization" on valgrind-developers for a more complete
description of this change and its effects on you.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2118
the places that normal users will see:
- command line: --tool=foo (although --skin=foo still works)
- docs: removed all traces (included renaming coregrind_skins.html to
coregrind_tools.html)
- in the usage messages
- in error messages
Also did in in some places that I judged were unlikely to cause clashes with
existing workspaces:
- in the header comments of many files (eg. "This file is part of Memcheck, a
Valgrind tool for...")
- in the regtests script
- in the .supp files
- in AUTHORS
- in README_MISSING_SYSCALL_OR_IOCTL
Also update the AUTHORS file to mention Jeremy.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2027
requests to allow client code to print messages through Valgrind's
logging mechanism. The new requests are:
VALGRIND_PRINTF - do a normal printf (prefixed with **PID**)
VALGRIND_PRINTF_BACKTRACE - do a printf with stack trace
VALGRIND_INTERNAL_PRINTF - printf, but for internal use (prefixed with ==PID==)
VALGRIND_INTERNAL_PRINTF_BACKTRACE - as above, with backtrace
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1974
filters to strip out varying things, and changed outputs correspondingly. Yell
if this breaks them for you.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1952
with the aim of making it more robust, more correct and perhaps faster.
This patch removes the need to poll blocking syscalls, by adding a proxy
LWP for each application thread. This LWP is a kernel thread whose job
is to run all (potentially) blocking syscalls, and also to handle signals.
This allows the kernel to do more of the work of dealing with signals,
so on kernels which do this properly (2.6), Valgrind's behavious is a
lot more posix compliant. On base 2.4 kernels, we emulate some of the
missing 2.6 functionality.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1918
count. Added a regression test for it.
Updated the basic test stderr filter to strip out line numbers from
vg_intercept.c
MERGE TO STABLE
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1812
CPUID.
Also added filters to Makefiles where missing; "make regtest" was broken
within distributions created using "make dist", now fixed.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1709
- changed deprecated INCLUDES variable to AM_CPPFLAGS
- moved the -DVG_LIBDIR definition from AM_CFLAGS into AM_CPPFLAGS
- generally neatened them up a bit -- removed old commented out stuff, fixed a
couple of other minor things
Everything works for me, hopefully it won't break things for anyone else...
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1680
under some setups.
Also fixed problem with Cachegrind tests, by filtering out P4s'
warning message.
Also fixed 'mismatches'.
------------------------------------------------------------
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1616
requiring "make install". This is good for two reasons:
1. shorter compile times ("make" instead of "make install")
2. don't need to install before running the regression tests
Changes:
- root Makefile now builds a libpthread.so.0 symlink to libpthread.so, which
was needed.
- startup script accepts a --in-place=<dir> option for running a non-installed
version, where <dir> is the root of the src tree
- VG_(mash_LD_PRELOAD_and_LD_LIBRARY_PATH) had to be fiddled with a bit
- tests/vg_regtest now uses the --in-place option to test the non-installed
version
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1614
installed, as it was silly since the reg tests themselves aren't installed.
Updated the "make regtest" target to use the uninstalled version in tests/.
Also, vg_regtest now no longer uses the installed version of Valgrind to do the
testing, but instead coregrind/valgrind. This means that you don't have to do
make install with your buggy changes before running the regtests on them :)
I even updated the RPM package .spec file!
Thanks to Dirk M�ller for the suggestion.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1551
are only required for regression testing.
If this breaks something, please mail me first instead of reverting.
Thank you.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1530
overview
-----------------------------------------------------------------------------
Previously Valgrind had its own versions of malloc() et al that replaced
glibc's. This is necessary for various reasons for Memcheck, but isn't needed,
and was actually detrimental, to some other skins. I never managed to treat
this satisfactorily w.r.t the core/skin split.
Now I have. If a skin needs to know about malloc() et al, it must provide its
own replacements. But because this is not uncommon, the core provides a module
vg_replace_malloc.c which a skin can link with, which provides skeleton
definitions, to reduce the amount of work a skin must do. The skeletons handle
the transfer of control from the simd CPU to the real CPU, and also the
--alignment, --sloppy-malloc and --trace-malloc options. These skeleton
definitions subsequently call functions SK_(malloc), SK_(free), etc, which the
skin must define; in these functions the skin can do the things it needs to do
about tracking heap blocks.
For skins that track extra info about malloc'd blocks -- previously done with
ShadowChunks -- there is a new file vg_hashtable.c that implements a
generic-ish hash table (using dodgy C-style inheritance using struct overlays)
which allows skins to continue doing this fairly easily.
Skins can also replace other functions too, eg. Memcheck has its own versions
of strcpy(), memcpy(), etc.
Overall, it's slightly more work now for skins that need to replace malloc(),
but other skins don't have to use Valgrind's malloc(), so they're getting a
"purer" program run, which is good, and most of the remaining rough edges from
the core/skin split have been removed.
-----------------------------------------------------------------------------
details
-----------------------------------------------------------------------------
Moved malloc() et al intercepts from vg_clientfuncs.c into vg_replace_malloc.c.
Skins can link to it if they want to replace malloc() and friends; it does
some stuff then passes control to SK_(malloc)() et al which the skin must
define. They can call VG_(cli_malloc)() and VG_(cli_free)() to do the actual
allocation/deallocation. Redzone size for the client (the CLIENT arena) is
specified by the static variable VG_(vg_malloc_redzone_szB).
vg_replace_malloc.c thus represents a kind of "mantle" level service.
To get automake to build vg_replace_malloc.o, had to resort to a similar trick
as used for the demangler -- ask for a "no install" library (which is never
used) to be built from it.
Note that all malloc, calloc, realloc, builtin_new, builtin_vec_new, memalign
are now aware of --alignment, when running on simd CPU or real CPU.
This means the new_mem_heap, die_mem_heap, copy_mem_heap and ban_mem_heap
events no longer exist, since the core doesn't control malloc() any more, and
skins can watch for these events themselves.
This required moving all the ShadowChunk stuff out of the core, which meant
the sizeof_shadow_block ``need'' could be removed, yay -- it was a horrible
hack. Now ShadowChunks are done with a generic HashTable type, in
vg_hashtable.c, which skins can "inherit from" (in a dodgy C-only fashion by
using structs with similar layouts). Also, the free_list stuff was all moved
as a part of this. Also, VgAllocKind was moved out of core into
Memcheck/Addrcheck and renamed MAC_AllocKind.
Moved these options out of core into vg_replace_malloc.c:
--trace-malloc
--sloppy-malloc
--alignment
The alternative_free ``need'' could go, too, since Memcheck is now in complete
control of free(), yay -- another horribility.
The bad_free and free_mismatch events could go too, since they're now not
detected by core, yay -- yet another horribility.
Moved malloc() et al wrappers for Memcheck out of vg_clientmalloc.c into
mac_malloc_wrappers.c. Helgrind has its own wrappers now too.
Introduced VG_USERREQ__CLIENT_CALL[123] client requests. When a skin function
is operating on the simd CPU, this will call a given function and run it on the
real CPU. The macros VG_NON_SIMD_CALL[123] in valgrind.h present a cleaner
interface to actually use. Also introduce analogues of these that pass 'tst'
from the scheduler as the first arg to the called function -- needed for
MC_(client_malloc)() et al.
Fiddled with USERREQ_{MALLOC,FREE} etc. in vg_scheduler.c; they call
SK_({malloc,free})() which by default call VG_(cli_malloc)() -- can't call
glibc's malloc() here. All the other default SK_(calloc)() etc. instantly
panic; there's a lock variable to ensure that the default SK_({malloc,free})()
are only called from the scheduler, which prevents a skin from forgetting to
override SK_({malloc,free})(). Got rid of the unused USERREQ_CALLOC,
USERREQ_BUILTIN_NEW, etc.
Moved special versions of strcpy/strlen, etc, memcpy() and memchr() into
mac_replace_strmem.c -- they are only necessary for memcheck, because the
hyper-optimised normal glibc versions confuse it, and for memcpy() etc. overlap
checking.
Also added dst/src overlap checks to strcpy(), memcpy(), strcat(). They are
reported not as proper errors, but just with single line warnings, as for silly
args to malloc() et al; this is mainly because they're on the simulated CPU
and proper error handling would be a pain; hopefully they're rare enough to
not be a problem. The strcpy check is done after the copy, because it would
require counting the length of the string beforehand. Also added strncpy() and
strncat(), which have overlap checks too. Note that addrcheck doesn't do
overlap checking.
Put USERREQ__LOGMESSAGE in vg_skin.h to do the overlap check error messages.
After removing malloc() et al and strcpy() et al out of vg_clientfuncs.c, moved
the remaining three things (sigsuspend, VG_(__libc_freeres_wrapper),
__errno_location) into vg_intercept.c, since it contains things that run on the
simulated CPU too. Removed vg_clientfuncs.c altogether.
Moved regression test "malloc3" out of corecheck into memcheck, since corecheck
no longer looks for silly (eg. negative) args to malloc().
Removed the m_eip, m_esp, m_ebp fields from the `Error' type. They were being
set up, and then read immediately only once, only if GDB attachment was done.
So now they're just being held in local variables. This saves 12 bytes per
Error.
Made replacement calloc() check for --sloppy-malloc; previously it didn't.
Added "silly" negative size arg check to realloc(), it didn't have one.
Changed VG_(read_selfprocmaps)() so it can parse the file directly, or from a
previously read buffer. Buffer can be filled with the new
VG_(read_selfprocmaps_contents)(). Using this at start-up to snapshot
/proc/self/maps before the skins do anything, and then parsing it once they
have done their setup stuff. Skins can now safely call VG_(malloc)() in
SK_({pre,post}_clo_init)() without the mmap'd superblock erroneously being
identified as client memory.
Changed the --help usage message slightly, now divided into four sections: core
normal, skin normal, core debugging, skin debugging. Changed the interface for
the command_line_options need slightly -- now two functions, VG_(print_usage)()
and VG_(print_debug_usage)(), and they do the printing themselves, instead of
just returning a string -- that's more flexible.
Removed DEBUG_CLIENTMALLOC code, it wasn't being used and was a pain.
Added a regression test testing leak suppressions (nanoleak_supp), and another
testing strcpy/memcpy/etc overlap warnings (overlap).
Also changed Addrcheck to link with the files shared with Memcheck, rather than
#including the .c files directly.
Commoned up a little more shared Addrcheck/Memcheck code, for the usage
message, and initialisation/finalisation.
Added a Bool param to VG_(unique_error)() dictating whether it should allow
GDB to be attached; for leak checks, because we don't want to attach GDB on
leak errors (causes seg faults). A bit hacky, but it will do.
Had to change lots of the expected outputs from regression files now that
malloc() et al are in vg_replace_malloc.c rather than vg_clientfuncs.c.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1524
was present from before the core/skin split, which is now dead. Means the
script is slightly simpler, and we can dispense with lots of expected
foo.stderr.hd files.
Also undid accidental change to required Automake version in main Makefile.am
from my last commit, whoops.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1518
