Int VG_(do_syscall) ( UInt, UWord, UWord, UWord, UWord, UWord, UWord );
to replace the previous:
Int VG_(do_syscall) ( UInt, ... )
Reason being that sometimes you could get incorrect args passed, when
passing 32-bit ints on 64-bit platforms. I also added macros
VG_(do_syscall[123456]) to make life easier, and converted all the
relevant calls.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3143
It compiles, but aborts immediately if you try to run it.
I didn't include ldt.c; I'm not sure how the LDT is used on AMD64. It can be
added later if necessary.
While doing this, did some 64-bit cleanness fixes:
- Added necessary intermediate casts to ULong to avoid warnings when converting
ThreadId to void* and vice versa, in vg_scheduler.c.
- Fixed VALGRIND_NON_SIMD_CALL[0123] to use 'long' as the return type.
- Fixed VALGRIND_PRINTF{,BACKTRACE} to use unsigned longs instead of unsigned
ints, as needed.
- Converted some offsets in vg_symtab2.h from "Int" to "OffT".
- Made strlen, strncat, etc, use SizeT instead of 'unsigned int' for the length
parameter.
- Couple of other minor things.
I had to insert some "#ifdef __amd64__" and "#ifndef __amd64__" guards in
places. In particular, in vg_mylibc.c, some of our syscall wrappers aren't
appropriate for AMD64 because the syscall numbering is a bit different in
places. This difference will have to be abstracted out somehow.
Also rewrote the sys_fcntl and sys_fcntl64 wrappers, as required for AMD64.
Also moved the ipc wrapper into x86, since it's not applicable for
AMD64. However, it is applicable (I think) for ARM, so it would be nice
to work out a way to share syscall wrappers between some, but not all,
archs. Hmm. Also now using the real IPC constants rather than magic
numbers in the wrapper.
Other non-AMD64-related fixes:
- ARM: fixed syscall table by accounting for the fact that syscall
numbers don't start at 0, but rather at 0x900000.
- Converted a few places to use ThreadId instead of 'int' or 'Int' for
thread IDs.
- Added both AMD64 and ARM (which I'd forgotten) entries to valgrind.spec.in.
- Tweaked comments in various places.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3136
into the core. Renamed them with capital letters at the same time (eg.
arg1-->ARG1, res-->RES) to reduce likelihood of name conflicts, and also
it doesn't hurt to make it clearer that they're macros. The result is a
very big diff, but conceptually it's very simple.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3126
wrappers. The management apologises for the excessive use of macros, but it's
hard to avoid and really does make the repetitive parts of the code (ie. the
parts that are repeated for each arch) much more concise.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3124
computation) into the generic core, because it's needed by the dispatch
loop of all archs. Also renamed it VG_(instr_ptr_offset), which is
clearer. Since it was the last use of the VGOFF_ prefix, I removed that
prefix.
Also cleaned up the ARM stubs slightly, by removing some of the copied,
commented-out x86 code which has since fallen out of date with the real
x86 code and was thus misleading.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3123
run, though. There are lots of stubs to be filled in. (The asm ones currently
just have "swi" in them, which seems to cause seg faults.)
Also, some of the macros are decided dubious, especially:
ARCH_* are bogus
SYSCALL_RET is bogus
PLATFORM_SET_SYSCALL_RESULT is bogus
not sure about SET_SYSCALL_RETVAL
FIRST_STACK_FRAME et al -- bogus?
VG_MAX_JUMPS ?
And in stage2.lds, the 0x8048000 is almost certainly wrong
This required some tweakings of the core:
- some of the vki_*.h kernel types were fixed up
- had to disable the AM_PROG_CC_C_O macro in configure.in, because automake
(autoconf?) didn't like it...
- some "#ifdef __x86__" guards were introduced, for nasty x86 things I don't
yet know how to factor out (trampoline page muck, sysinfo page muck).
- fixed a minor stupidity in vg_proxylwp.c.
- moved the ptrace wrapper into the x86-linux part
- had to change the intercept mangling scheme, to use 'J' instead of '$' as the
escape char because GCC didn't like '$'. This is all very dubious, and only
works because none of our intercepted symbols contains a 'J'. To be fixed up
ASAP.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3120
- move things around so that each arch doesn't duplicate stuff to do with
VG_(do_thread_syscall)().
- enum PXState doesn't need to be visible outside vg_proxylwp.c
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3097
arch-neutral ones like R_STACK_PTR). Where they were used, we now always talk
about an offset into the Vex guest state, and an offset. As a result,
the shadow register get/set functions had to change. They now also use
an offset and size, and in an arch-neutral way.
Also, I combined the five the post_reg_write* functions into a single one that
takes a 'CorePart' parameter (plus also a ThreadId). Also, I added more
arguments (the CorePart, and the ThreadId) to the post_mem_write event, for
consistency with the pre_mem_* events.
Also, I reduced the number of register names that must be specified by each
arch, by factoring out duplication; and shortened their names for the core (eg.
ARCH_STACK_PTR is now STACK_PTR).
Plus some related minor cleanups in syscall wrappers.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3094
state pointer points directly at the ThreadState.arch.vex field, thus
updating it in place and avoiding a lot of code (and time-wasting)
which copies stuff back and forth to baseBlock.
Fix zillions of other places in the system where the current thread id
is needed. It is now passed to all needed places.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3090
Also remove Memcheck's and Addrcheck's use of syscall_wrappers,
since they didn't do anything useful.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3064
- Moved some more syscall wrappers into linux/syscalls.c and
x86-linux/syscalls.c. There are still heaps of wrappers that probably aren't
generic, but I'm not sure, so they're staying in vg_syscalls.c for now.
Let's worry about that when we do an OS port.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3036
- Moved the system call table into x86-linux, since it's platform specific.
- Started moving the non-generic syscall wrappers into linux/syscalls.c and
x86-linux/syscalls.c as appropriate.
- Added new coregrind/linux/ directory and some files in it.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3034
This required some tricks with casting to maintain Memcheck's silly (ie.
negative) arg checking. The allocator was also changed accordingly. It
should now be able to allocate more than 4GB blocks on 64-bit platforms.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2906
- Added include/x86-linux/ and include/linux/ subdirectories, with Makefile.am
files.
- Overhauled the definitions of kernel types. include/vg_kerneliface.h is now
three files, include/linux/vki.h, include/x86-linux/vki_arch.h, and
include/x86-linux/vki_arch_posixtypes.h. These files separate the
common/Linux and x86/Linux parts cleanly. All code is copied verbatim from
the relevant kernel headers, except that VKI_/vki_ prefixes are added as
necessary to distinguish them from glibc types. (This is done consistently,
unlike previously when some types did not have the prefixes.)
All code is clearly marked to show which particular header file it came from,
and the Linux version used. (I used 2.6.8.1, the most recent stable release,
for all of them.)
A few of the types changed; this is because they changed between the older
versions of Linux and the current 2.6.8.1. I checked that all these changes
were ok with respect to backwards compatibility for our purposes.
- vg_unsafe.h has been removed; we are no longer including any kernel headers,
as we have our own copies for everything. This is because installed kernel
headers are not reliable, and often cause compilation problems. (bug
#92420 is a recent example)
- Removed some no-longer-needed header-presence tests from configure.in.
- Some code in the rest of Valgrind was changed to account for some slight
changes in the names of our VKI_/vki_ kernel constants and types.
- Updated README_MISSING_SYSCALL_OR_IOCTL accordingly.
- Fixed off-by-one error with VKI_GDT_ENTRY_TLS_MAX (merged from stable branch)
The end result is that the kernel types situation should be much clearer, and
similar files can be created relatively easily for other architectures as
necessary.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2884
- Factored out the remaining arch-specific code from vg_libpthread.c.
- Also fixed up the build process for x86/libpthread.c, which was done
wrongly in the previous commit.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2798
in a similar way to the previous patch that removed the limit on the
number of semaphores and fixes bug 86264.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2776
that doesn't route signals to the correct threads properly) the siginfo
data was not being propagated to any signal handlers installed by the
client program.
This is because the main thread routes the signal to the proxy LWP by
using the tkill system call but that then appears in the proxy as a user
initiated signal and the original siginfo data is lost.
This patch adds a small queue of siginfo data for pending sigals to
each thread's state so that when the proxy LWP passes the signal back
to the main thread the relevant siginfo data can be recovered and passed
on to any signal handlers. Thix fixes bug 91325.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2773
