FreeBSD has a sysctl that prevents mmapping regions
that are both Write and Exec. This setting prevents
Valgrind from workig correctly.
This change uses ELF tags to turn off W^X control,
and also removes a sysctl check for the same flag.
Patch contributor:
0a3a794143
There is quite a lot of stuff here.
The problem is that setproctitle and kern.ps_strings were using the Valgrind host auxv
rather than the guest. The proposed patch would have just ignored those memory ranges.
I've gone a fair bit further than that
1. refactored the initimg code for building the client auxv. Previously we were
simply ignoring any non-scalar entries. Now we copy most of thse as well.
That means that 'strtab' built on the client stack no longet only contains
strings, at can also now contain binary structures. Note I was a bit
concerned that there may be some alignment issues, but I haven't seen any
problems so far.
2. Added intercepts to sysctl and sysctlbyname for kern.ps_strings, then find
AT_PS_STRINGS from the client auxv that is now usable from step 1.
3. Some refactoring of sysctl and sysctlbyname syscall wrappers. More to do
there!
4. Added a setproctitle testcase (that also tests the sysctls).
5. Updated the auxv testcase now that more AT_* entries are handled.
This is a translation of the Linux vgdb-invoker-ptrace.c
to the FreeBSD ptrace dialect. It seems to be basically
functional (3 out of 4 of the regression tests pass,
and for the 4th one it seems to be a limitation of
ptrace on FreeBSD that it can cause syscalls to be
interrupted).
After working on an issue that turns out to seem to be with the
FreeBSD kernel sched_uler I played a lot with the Valgrind
syscall and scheduler code. I've kept the comments and the
reformatting.
These concern auxv, swapoff and fcntl F_KINFO
I wanted to use the new fcntl K_INFO to replace the existing
horrible implementation of resolve_filename, but it seems to
have change the behaviour for redirected files. Several
fdleak regtests fail because stdout resolves to an empty
string.
memfd_secret is a new syscall in linux 5.14. memfd_secret() is
disabled by default and a command-line option needs to be added to
enable it at boot time.
$ cat /proc/cmdline
[...] secretmem.enable=y
https://bugs.kde.org/451878https://lwn.net/Articles/865256/
ht_sigchld_ignore and ht_ignore_node were defined in pub_core_signals.h
which cannot include any other tool header.
...checking header files and include directives
*** File coregrind/pub_core_signals.h must not include pub_tool_hashtable.h
So move the definition and type to pub_tool_signals.h
Valgrind fork+execs debuginfod-find in order to perform debuginfod
queries. Any SIGCHLD debuginfod-find sends upon termination can
mistakenly be delivered to the client running under valgrind.
To prevent this, record in a hash table the PID of each process
valgrind forks for internal use. Do not send SIGCHLD to the client
if it is from a PID in this hash table.
https://bugs.kde.org/show_bug.cgi?id=445011
This implements rseq for amd64, arm, arm64, ppc32, ppc64,
s390x and x86 linux as ENOSYS (without warning).
glibc will start using rseq to accelerate sched_getcpu, if
available. This would cause a warning from valgrind every
time a new thread is started.
Real rseq (restartable sequences) support is pretty hard, so
for now just explicitly return ENOSYS (just like we do for clone3).
https://sourceware.org/pipermail/libc-alpha/2021-December/133656.html
Adds syscall wrappers for __specialfd and __realpathat.
Also remove kernel dependency on COMPAT_FREEBSD10.
This change also reorganizes somewhat the scalar test
and adds configure time checks for the FreeBSD version,
allowing regression tests to be compiled depending on the
FreeBSD release.
From now on, scalar.c will contain syscalls for FreeBSD 11 and 12
and subsequent releases will get their own scalar, starting with
scalar_13_plus.c.
I tried to test drd/tests/pth_mutex_signal on Solaris
(you never know) but encountered a missing syscall
wrapper. So this adds a very basic wrapper for lwp_mutex_unlock.
Also update a Solaris expected that I missed amongst the FreeBSD changes.
Currently the version is updated in 3 places, configure.ac,
include/valgrind.h and docs/xml/vg-entities.xml. This goes wrong from
time to time. So only define the version (and release date) once in
configure.ac and update both other places at configure time.
Implement BPF_MAP_LOOKUP_AND_DELETE_ELEM (command 21) and
BPF_MAP_FREEZE (command 22) and produce a WARNING instead of a fatal
error for unrecognized BPF commands.
https://bugs.kde.org/show_bug.cgi?id=426148
This is a system call introduced in Linux 5.9.
It's typically used to bulk-close file descriptors that a process inherited
without having desired so and doesn't want to pass them to its offspring
for security reasons. For this reason the sensible upper limit value tends
to be unknown and the users prefer to stay on the safe side by setting it
high.
This is a bit peculiar because, if unfiltered, the syscall could end up
closing descriptors Valgrind uses for its purposes, ending in no end of
mayhem and suffering.
This patch adjusts the upper bounds to a safe value and then skips over
the descriptor Valgrind uses by potentially calling the real system call
with sub-ranges that are safe to close.
The call can fail on negative ranges and bad flags -- we're dealing with
the first condition ourselves while letting the real call fail on bad
flags.
https://bugs.kde.org/show_bug.cgi?id=439090
Make the STFLE instruction report the miscellaneous-instruction-extensions
facility 3 and the vector-enhancements facility 2 as supported. Indicate
support for the latter in the HWCAP vector as well.
glibc 2.34 will try to use clone3 first before falling back to
the clone syscall. So implement clone3 as sys_ni_syscall which
simply return ENOSYS without producing a warning.
https://bugs.kde.org/show_bug.cgi?id=439590
It has been observed that clang emits an error in valgrind.h for the macro
VALGRIND_DO_CLIENT_REQUEST_EXPR:
"[...] unsupported inline asm: input with type 'int' matching output with
type 'volatile unsigned long'"
Fix this with an explicit cast of the input to 'unsigned long int.'
The patch has been suggested by Jonathan Albrecht.
Since DRD tracks the lowest and highest stack address that has been used,
it needs to know about stack registration events. Hence pass on stack
registration events to tools.
The ISA 3.1 support has both word instructions of length 4-bytes and prefixed
instruction of length 8-bytes. The following fix is needed when Valgrind
is compiled using an ISA 3.1 compiler.
Implement the new instructions/features that were added to z/Architecture
with the vector-enhancements facility 1. Also cover the instructions from
the vector-packed-decimal facility that are defined outside the chapter
"Vector Decimal Instructions", but not the ones from that chapter itself.
For a detailed list of newly supported instructions see the updates to
`docs/internals/s390-opcodes.csv'.
Since the miscellaneous instruction extensions facility 2 was already
addressed by Bug 404406, this completes the support necessary to run
general programs built with `--march=z14' under Valgrind. The
vector-packed-decimal facility is currently not exploited by the standard
toolchain and libraries.
faccessat2 is a new syscall in linux 5.8 and will be used by glibc 2.33.
faccessat2 is simply faccessat with a new flag argument. It has
a common number across all linux arches.
https://bugs.kde.org/427787
The only "special" thing about these syscalls is that the given
struct sched_attr determines its own size for future expansion.
Original fix by "ISHIKAWA,chiaki" <ishikawa@yk.rim.or.jp>
https://bugs.kde.org/show_bug.cgi?id=369029
I've tested this on amd64 and arm but I'm enabling it on all
arches since the syscall should work identically on all of them.
This was requested by users for a long time (almost 5 years) and
in fact, some programs (like libvirt) use namespaces and fork off
to enter other namespaces. Lack of implementation means valgrind
can't be used with these programs (or their configuration must be
changed to not use namespaces, which defeats the purpose).
Without knowing it, I've converged to same patch as mentioned in
bugs below.
https://bugs.kde.org/show_bug.cgi?id=343099https://bugs.kde.org/show_bug.cgi?id=368923https://bugs.kde.org/show_bug.cgi?id=369031
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Don't assume that __MINGW32__ implies x86; Windows runs on ARM/ARM64
as well, and there are mingw toolchains that target those architectures.
This mirrors how the MSVC parts of the same expressions are written,
as (defined(_WIN32) && defined(_M_IX86)) and
(defined(_WIN64) && defined(_M_X64)) - not relying on _WIN32/_WIN64
or __MINGW32__/__MINGW64__ alone to indicate architecture.
Change the __MINGW64__ and _WIN64 ifdefs into plain __MINGW32__
and _WIN32 as well, for clarity - these defines mostly imply
platform.
