and stack address description.
* A race condition on an allocated block shows the stacktrace, but
does not show the thread # that allocated the block.
This patch adds the output of the thread # that allocated the block.
* The patch also fixes the confusion that might appear between
the core threadid and the helgrind thread nr in Stack address description:
A printed stack addrinfo was containing a thread id, while all other helgrind
messages are using (supposed to use) an 'helgrind thread #' which
is used in the thread announcement.
Basically, the idea is to let a tool set a "tool specific thread nr'
in an addrinfo.
The pretty printing of the addrinfo is then by preference showing this
thread nr (if it was set, i.e. different of 0).
Currently, only helgrind uses this addrinfo tnr.
Note: in xml mode, the output is matching the protocol description.
I.e., GUI should not be impacted by this change, if they properly implement
the xml protocol.
* Also, make the output produced by m_addrinfo consistent:
The message 'block was alloc'd at' is changed to be like all other
output : one character indent, and starting with an uppercase
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14175
of memcheck and helgrind in a common module:
pub_tool_addrinfo.h pub_core_addrinfo.h m_addrinfo.c
At the same time, the factorised code is made usable by other
tools also (and is used by the gdbserver command 'v.info location'
which replaces the helgrind 'describe addr' introduced 1 week ago
and which is now callable by all tools).
The new address description code can describe more addresses
(e.g. for memcheck, if the block is not on the free list anymore,
but is in an arena free list, this will also be described).
Similarly, helgrind address description can now describe more addresses
when --read-var-info=no is given (e.g. global symbols are
described, or addresses on the stack are described as
being on the stack, freed blocks in the arena free list are
described, ...).
See e.g. the change in helgrind/tests/annotate_rwlock.stderr.exp
or locked_vs_unlocked2.stderr.exp
The patch touches many files, but is basically a lot of improvements
in helgrind output files.
The code changes are mostly refactorisation of existing code.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13965
* add a function Bool VG_(parse_enum_set) in pub_tool_libcbase.h/m_libcbase.c
(close to Bool VG_(parse_Addr)
* Implement Bool MC_(parse_leak_heuristics) and MC_(parse_leak_kinds)
as a call to VG_(parse_enum_set)
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13898
Option -v outputs a list of used suppressions. This only gives
the nr of times a suppression was used.
For a leak search, this only gives the nr of loss records that
have been suppressed, but it does not give additional needed details
to understand more precisely what has been suppressed
(i.e. nr of blocks and nr of bytes).
=> Add in the tool interface update_extra_suppression_use and
print_extra_suppression_info functions to allow the tool to record
additioonal use statistics for a suppression. These statistics
can be done depending on the error (and its data) which is suppressed.
Use this in memcheck for the leak suppressions, to maintain and output
the nr of blocks and bytes suppressed by a suppression during
the last leak search.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13651
If a suppression file contains an error, the lineno reported could be wrong.
Also, give filename and lineno of the used suppressions in -v debugging output.
The fix consists in ensuring that tool specific read_extra function gets
the Int* lineno pointer, together with other VG_(get_line) parameters.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13469
* when SEGV trapped, report the main thread size as an unsigned size_t
* Similar for memcheck overlap errors
For example, for the 2 calls:
memcpy(&a, &a, 2147483648UL);
memcpy(&a, &a, -1); // silently accepted by gcc 4.4.4 -Wall
// while the 3rd arg is supposed to be a size_t
we now obtain (on a 32 bit system)
Source and destination overlap in memcpy(0xbe97113f, 0xbe97113f, 2147483648)
Source and destination overlap in memcpy(0xbef6d13f, 0xbef6d13f, 4294967295)
instead of
Source and destination overlap in memcpy(0xbe8e012f, 0xbe8e012f, -2147483648)
Source and destination overlap in memcpy(0xbe8e012f, 0xbe8e012f, -1)
Do not ask me why
memcpy(&a, &a, -1);
is supposed to be accepted/acceptable/valid code.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13326
The option --keep-stacktraces controls which stack trace(s) to keep for
malloc'd and/or free'd blocks. This can be used to obtain more information
for 'use after free' errors or to decrease Valgrind memory and/or cpu usage
by recording less information for heap blocks.
This fixes 312913 Dangling pointers error should also report the alloc
stack trace.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13223
284540 Memcheck shouldn't count suppressions matching still-reachable allocations
307465 --show-possibly-lost=no should bring down the error count / exit code
Using the options --show-leak-kinds=kind1,kind2,.. and
--errors-for-leak-kinds=kind1,kind2,.., each leak kind (definite, indirect,
possible, reachable) can now be individually reported and/or counted as
an error.
In a leak suppression entry, an optional line 'match-leak-kinds:'
controls which leak kinds are suppressed by this entry.
This is a.o. useful to avoid definite leaks being "catched"
by a suppression entry aimed at suppressing possibly lost blocks.
Default behaviour is the same as 3.8.1
Old args (--show-reachable and --show-possibly-lost) are still accepted.
Addition of a new test (memcheck/tests/lks) testing the new args
and the new suppression line.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13170
* For tools replacing the malloc library (e.g. Memcheck, Helgrind, ...),
the option --redzone-size=<number> allows to control the padding
blocks (redzones) added before and after each client allocated block.
Smaller redzones decrease the memory needed by Valgrind. Bigger
redzones increase the chance to detect blocks overrun or underrun.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@12807
* Redzones for custom alloc were not protected by VALGRIND_MALLOCLIKE_BLOCK.
mc_main.c client request handling completed with protection
of the redzones.
* custom_alloc.c test modified to test this case.
* mc_errors.c modified so as to first search for a malloc-ed block
bracketting the error : for a custom allocator, a recently freed
block can have just been re-allocated.
In such a case, describing the address (e.g. in case of error)
points to the block freed rather than to the block just allocated.
If there is *also* a recently freed block bracketting the address,
the block description is changed to indicate that.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@12439
about leaked or reachable blocks)
This patch implements two new memcheck gdbserver monitor commands:
block_list <loss_record_nr>
after a leak search, shows the list of blocks of <loss_record_nr>
who_points_at <addr> [<len>]
shows places pointing inside <len> (default 1) bytes at <addr>
(with len 1, only shows "start pointers" pointing exactly to <addr>,
with len > 1, will also show "interior pointers")
Compiled and reg-tested on f12/x86, deb5/amd64, f16/ppc64.
The 'block_list' command is implemented on top of the
lr_array/lc_chunks/lc_extras arrays used during the last leak search.
NB: no impact on the memory for the typical Valgrind usage where a leak
search is only done at the end of the run.
Printing the block_list of a loss record simply consists in scanning the
lc_chunks to find back the chunks corresponding to the loss record for which
block lists is requested.
The 'who_points_at' command is implemented by doing a scan similar to
(but simpler than) the leak search scan.
lc_scan_memory has been enhanced to have a mode to search for a specific
address, rather than to search for all allocated blocks.
VG_(apply_to_GP_regs) has been enhanced to also provide the ThreadId and
register name in the callback function.
The patch touches multiple files (but most changes are easy/trivial or factorise
existing code).
Most significant changes are in memcheck/mc_leakcheck.c :
* changed the LC_Extra struct to remember the clique for indirect leaks
(size of structure not changed).
* made lr_array a static global
* changed lc_scan_memory:
to have a search mode for a specific address (for who_points_at)
(for leak search) to pass a 'current clique' in addition to the clique
leader
so as to have a proper clique hierarchy for indirectly leaked blocks.
* print_results: reset values at the beginning of the print_result of the
next leak search, rather than at the end of print_results of the previous
leak search.
This allows to continue showing the same info for loss records till a new
leak search is done.
* new function print_clique which recursively prints a group of leaked
blocks, starting from the clique leader.
* new function MC_(print_block_list) : calls print_clique for each clique
leader found for the given loss record.
* static void scan_memory_root_set : code extracted from
MC_(detect_memory_leaks) (no relevant change)
* void MC_(who_points_at) : calls scan_memory_root_set, lc_scan_memory
and VG_(apply_to_GP_regs)(search_address_in_GP_reg) to search
pointers to the given address.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@12357
* new files include/pub_tool_groupalloc.h and coregrind/m_groupalloc.c
implementing a group allocator (based on helgrind group alloc).
* include/Makefile.am coregrind/Makefile.am : added pub_tool_groupalloc.h
and m_groupalloc.c
* helgrind/libhb_core.c : use pub_tool_groupalloc.h/m_groupalloc.c
instead of the local implementation.
* include/pub_tool_oset.h coregrind/m_oset.c : new function
allowing to create an oset that will use a pool allocator.
new function allowing to clone an oset (so as to share the pool alloc)
* memcheck/tests/unit_oset.c drd/tests/unit_bitmap.c : modified
so that it compiles with the new m_oset.c
* memcheck/mc_main.c : use group alloc for MC_Chunk
memcheck/mc_include.h : declare the MC_Chunk group alloc
* memcheck/mc_main.c : use group alloc for the nodes of the secVBitTable OSet
* include/pub_tool_hashtable.h coregrind/m_hashtable.c : pass the free node
function in the VG_(HT_destruct).
(needed as the hashtable user can allocate a node with its own alloc,
the hash table destroy must be able to free the nodes with the user
own free).
* coregrind/m_gdbserver/m_gdbserver.c : pass free function to VG_(HT_destruct)
* memcheck/mc_replace_strmem.c memcheck/mc_machine.c
memcheck/mc_malloc_wrappers.c memcheck/mc_leakcheck.c
memcheck/mc_errors.c memcheck/mc_translate.c : new include needed
due to group alloc.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@12341
(Philippe Waroquiers, philippe.waroquiers@skynet.be)
This patch provides three improvements in the way the free list is
handled in memcheck.
First improvement: a new command line option --freelist-big-blocks
(default 1000000) specifies the size of "free list big blocks".
Such big blocks will be put on the free list, but will be re-cycled first
(i.e. in preference to block having a smaller size).
This fixes the bug https://bugs.kde.org/show_bug.cgi?id=250065.
Technically, the freed list is divided in two lists : small
and big blocks. Blocks are first released from the big block list.
Second improvement: the blocks of the freed list are re-cycled before
a new block is malloc-ed, not after a block is freed.
This gives better error messages for dangling pointer errors
when doing many frees without doing malloc between the frees.
(this does not uses more memory).
Third improvement: a block bigger than the free list volume will be
put in the free list (till a malloc is done, so as the needed memory
is not bigger than before) but will be put at the beginning of the
free list, rather than at the end. So, allocating then freeing such a
block does not cause any blocks in the free list to be released.
Results of the improvements above, with the new regression test
memcheck/test/big_blocks_freed_list: with the patch, 7 errors
are detected, 6 are giving the (correct) allocation stack.
Without the patch, only 6 errors are detected, 5 errors without
allocation stack, 1 with a (wrong) allocation stack.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@12202
--cmd-time-out
* changed prefixes of Valgrind core monitor commands from vg. to v.
* removed prefixes of Tool monitor commands
* memcheck leak_check 'leakpossible' arg renamed to 'possibleleak'
* memcheck make_memory 'ifaddressabledefined' arg renamed to
'Definedifaddressable'
(with uppercase D to avoid confusion with 'defined' arg).
* vgdb options
- Some doc updates : more logical option order documentation,
specify 'standalone' for options aimed at standalone usage.
- added option --cmd-time-out for standalone vgdb
(comment of Josef Weindendorfer, needed to interface with a callgrind GUI)
* updated tests according to the above.
* updated documentation according to the above.
* some additional minor doc fixes/clarifications
(Philippe Waroquiers, philippe.waroquiers@skynet.be). Bug 214909
comment 111.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@11844
mempools: try and relate an invalid address to known mempool
allocated blocks, and if that fails, to malloc'd blocks that
back the mempool. See #254420.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@11509
both wrapped up in XML tags (as before) but also in plain text in a
sequence of CDATA blocks. Normally only one, but in the worst case
the raw data will have ]]> in it, in which case it needs to be split
across two CDATA blocks.
This apparently simple change involved a lot of refactoring of the
suppression printing machinery:
* in the core-tool iface, change "print_extra_suppression_info" (which
prints any auxiliary info) to "get_extra_suppression_info", which
parks the text in a caller-supplied buffer. Adjust tools to match.
* VG_(apply_StackTrace): accept a void* argument, which is passed to
each invokation of the functional parameter (a poor man's closure
implementation).
* move PRINTF_CHECK into put_tool_basics.h, where it should have been
all along
* move private printf-into-an-XArray-of-character functions from
m_debuginfo into m_xarray, and make them public
* gen_suppression itself: use all the above changes. Basically we
always generate the plaintext version into an XArray. In text mode
that's just printed. In XML mode, we print the XMLery as before,
but the plaintext version is dumped into a CDATA block too.
* update the Protocol 4 specification to match all this.
This still isn't 100% right in the sense that the CDATA block data
needs to be split across multiple blocks if it should ever contain the
CDATA end mark "]]>". The Protocol 4 spec has this right even though
the implementation currently doesn't.
Fixes#191189.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@10822
- Always print a blank line after significant messages (eg. errors). This
makes the handling of blank lines much simpler.
- Don't print full stops at the end of messages. We mostly don't do it, so
I got rid of all the remaining ones I could find for consistency.
- Use --leak-check=full rather than --leak-check=yes, for consistency with
docs and other messages.
- Update partiallydefinedeq.stderr.exp2 for older changes.
This commit only updates the code. Test updates will follow shortly. (I'm
separating them so the code changes aren't swamped by the test changes in
the SVN logs.)
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@10783
* VG_(find_seginfo): incrementally rearrange the DebugInfo list, like
most of the other list-searching functions do.
* rename all VG_(*seginfo*) functions exported from m_debuginfo to
VG_(*DebugInfo*). "seginfo" was a historical name which was mostly
but not completely, done away with some time back.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@10678
reported in error messages were not correct. As an example, the following
output was produced before this patch (not correct):
$ ./vg-in-place --tool=helgrind --num-callers=1 /bin/true
...
FATAL: in suppressions file ".in_place/default.supp" near line 893:
suppression must contain at least one location line which is not "..."
exiting now.
$ ./vg-in-place --tool=drd --num-callers=1 /bin/true
FATAL: in suppressions file ".in_place/default.supp" near line 475:
suppression must contain at least one location line which is not "..."
exiting now.
After having applied this patch the above commands display line numbers
1104 and 619, referring to the first suppression pattern containing
three dots for the topmost stack frame, as expected.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@10632
were longer than 200 chars. Now dynamic memory is used and so they can be
arbitrarily long in theory, although in practice it bombs out at 100,000 for
sanity purposes. This required adjusting the core/tool interface for
read_extra_suppression_info().
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@10581
I tried using 'svn merge' to do the merge but it did a terrible job and
there were bazillions of conflicts. So instead I just took the diff between
the branch and trunk at r10155, applied the diff to the trunk, 'svn add'ed
the added files (no files needed to be 'svn remove'd) and committed.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@10156
there were a lot of loss records.
The fix was:
- Avoid the O(m * n) looping over the chunks when creating the loss
records, by putting loss records into an OSet instead of a list, which
makes duplicate detection for each chunk an O(log n) operation instead of
an O(n) operation.
- Avoid the looping over loss records which was used to do a poor
man's sort, but was O(n^2). Instead copy pointers to the loss records
from the OSet into an array and sort it normally with VG_(ssort) (n log n,
usually) before printing.
This approach was similar to that used in the patch Philippe attached to the
bug report.
Other changes:
- Added Philippe's test programs in the new memcheck/perf directory. It
used to take 57s on my machine, now it takes 1.6s.
- Cleaned up massif/perf/Makefile.am to be consistent with other Makefiles.
- Improved some comments relating to VgHashTable and OSet.
- Avoided a redundant traversal of the hash table in VG_(HT_to_array), also
identified by Philippe..
- Made memcheck/tests/mempool's results independent of the pointer size, and
thus was able to remove its .stderr.exp64 file.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@9781
dubious find-minimum-loss-record loop in print_results(), which was using an
inconsistent mixture of szB and szB+indirect_szB.
Two test results changed, just different sort orders for same-sized loss
records.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@9704
- It heavily refactors the code: uses better names for things, splits up
complex functions that behaved very differently depending on how they were
called, removes some redundancies, and generally makes it much simpler and
easier to follow.
- It adds lots of comments, both inline, and also a big explanatory one at
the top which makes it clear exactly how the leak checker works and also
exactly what is meant by definite, possible, and indirect leaks. It also
has some ideas for future improvements.
- All tabs have been converted to spaces.
It also improves the functionality:
- Previously if you did --leak-check=summary, indirect and suppressed
blocks were counted as definite leaks. Now they are done properly, and so
the summary results from --leak-check=summary match those from
--leak-check=yes.
- Previously, some possibly reachable blocks were miscategorised as
definitely reachable, because only the pointer to the block itself was
considered, not any preceding pointers in the chain. This is now fixed.
- Added memcheck/tests/leak-cases, which fully tests all the possible
combinations of directly/indirectly reachable and possibly/definitely
reachable.
And it improves the manual quite a bit, and the FAQ a little bit.
This doesn't fix the leak checker to handle MALLOCLIKE_BLOCK works that have
been taken from within malloc'd blocks, but I think I know how to do it and
hope to do so in a subsequent commit.
It also changes all instances of "<constant>memcheck</constant>" in the
Memcheck manual to "Memcheck", for consistency and because "Memcheck" is
easier to write. There's one similar case for DRD but I didn't change that.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@9330
that are memory offsets) with PtrdiffT; OffT should only be used for file
sizes and offsets.
Change Off64T from a ULong to a Long, as it should be. Replace some uses
of ULong in the address space manager with Off64T to match.
Also add a comment explaining the meanings of the basic types like Addr,
OffT, SizeT, etc.
Also fix the prototype for VG_(pread) -- the last arg is an OffT, not an
Int.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@8959
relatively minor extensions to m_debuginfo, a major overhaul of
m_debuginfo/readdwarf3.c to get its space usage under control, and
changes throughout the system to enable heap-use profiling.
The majority of the merged changes were committed into
branches/PTRCHECK as the following revs: 8591 8595 8598 8599 8601 and
8161.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@8621
