arch-neutral ones like R_STACK_PTR). Where they were used, we now always talk
about an offset into the Vex guest state, and an offset. As a result,
the shadow register get/set functions had to change. They now also use
an offset and size, and in an arch-neutral way.
Also, I combined the five the post_reg_write* functions into a single one that
takes a 'CorePart' parameter (plus also a ThreadId). Also, I added more
arguments (the CorePart, and the ThreadId) to the post_mem_write event, for
consistency with the pre_mem_* events.
Also, I reduced the number of register names that must be specified by each
arch, by factoring out duplication; and shortened their names for the core (eg.
ARCH_STACK_PTR is now STACK_PTR).
Plus some related minor cleanups in syscall wrappers.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3094
state pointer points directly at the ThreadState.arch.vex field, thus
updating it in place and avoiding a lot of code (and time-wasting)
which copies stuff back and forth to baseBlock.
Fix zillions of other places in the system where the current thread id
is needed. It is now passed to all needed places.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3090
Also remove Memcheck's and Addrcheck's use of syscall_wrappers,
since they didn't do anything useful.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3064
- All memory-related errors are now clear whether they are caused by
unaddressable or uninitialised memory. (Previously, writes were
clearly addressability errors, but reads could be either.) Mostly
done by replacing the 'isWrite' field in MAC_Error with 'isUnaddr'.
Also, mc_check_readable() now indicates not just if an error occurred,
but what kind of error (ie. addressability or definedness).
- Put machinery into place in the core to inform tools when registers
are being read by the core -- ie. a 'pre_reg_read' event. Most
notably, this facilitates syscall scalar arg definedness checking for
Memcheck. Currently this is only working for read(), write(), exit()
and exit_group(), but it will be extended as the syscalls are
overhauled as part of the arch-abstraction work.
A consequence of this is that the ParamErr messages have changed. This:
Syscall param write(buf) contains uninitialised byte(s)
now means that the pointer 'buf' is partially undefined. If the memory
pointed to by 'buf' is partially undefined or unaddressable, it says one of:
Syscall param write(buf) points to uninitialised byte(s)
Syscall param write(buf) points to unaddressable byte(s)
The docs have been updated accordingly.
I also added a couple of regression tests.
These two change sare notable for being the first improvements to
Memcheck's checking/errors in a long time.
I also folded mc_clientreqs.c into mc_main.c, which saves exporting a
whole bunch of things that are not used anywhere else.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2949
__attribute((regparm(n))) with REGPARM(n) everywhere. REGPARM() is defined in
vg_skin.h, but will eventually be defined separately for each arch.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2601
Patch to improve SSE/SS2 support
This patch should implement most of the missing SSE/SSE2 opcodes. About
the only ones it doesn't do are the MASKMOVxxx ones as they are quite
horrible and involved an implicit reference to EDI so I need to think
about them a bit more.
The patch also includes a set of tests for the MMX/SSE/SSE2 opcodes to
validate that they have the same effect under valgrind as they do when
run normally. In one or two cases this wasn't actually the case even
for some of the implemented opcodes, so I fixed those as well ;-)
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2202
remove the test that the first page of memory is inaccessible. This
is now getting in the way.
Fixes#69886.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2180
Valgrind's dependency on the dynamic linker for getting started, and
instead takes things into its own hands.
This checkin doesn't add much in the way of new functionality, but it
is the basis for all future work on Valgrind. It allows us much more
flexibility in implementation, and well as increasing the reliability
of Valgrind by protecting it more from its clients.
This patch requires some changes to tools to update them to the changes
in the tool API, but they are straightforward. See the posting "Heads
up: Full Virtualization" on valgrind-developers for a more complete
description of this change and its effects on you.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2118
the places that normal users will see:
- command line: --tool=foo (although --skin=foo still works)
- docs: removed all traces (included renaming coregrind_skins.html to
coregrind_tools.html)
- in the usage messages
- in error messages
Also did in in some places that I judged were unlikely to cause clashes with
existing workspaces:
- in the header comments of many files (eg. "This file is part of Memcheck, a
Valgrind tool for...")
- in the regtests script
- in the .supp files
- in AUTHORS
- in README_MISSING_SYSCALL_OR_IOCTL
Also update the AUTHORS file to mention Jeremy.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2027
Scientific Library (gsl-1.4) compiled with Intel Icc 7.1 20030307Z '-g
-O -xW'. I think this gives pretty good coverage of SSE/SSE2 floating
point instructions, or at least the subset emitted by Icc. So far
tested on memcheck and nulgrind; addrcheck and cachesim still testing.
MERGE TO STABLE
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1955
to inline. This is needed to get a warning-free compilation on 3.3.1.
It seems we had "inline" on some pretty huge functions in places.
Also it appears gcc-3.3.1 won't inline a function call in a tail call
position, reasonably enough. I assume in that case it prefers to
create a tailcall to the callee, rather than inlining it.
MERGE TO STABLE
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1907
valgrind.h. Although these requests are not implemented by the core, they can
be implemented by skins that track heap blocks, eg. Memcheck, Annelid, Massif.
This is in preparation for committing Massif to the repository.
I think I managed to make the change in a binary-compatible way. The only
inconvenience for users is that if they have a client program compiled with the
old requests in, Valgrind will abort with an explanatory message that tells
them to recompile. Once they've done that (no changes to their program are
required), it works again.
I even updated the docs.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1881
them in a shared place. (They used to be different, when Addrcheck didn't
distinguish between reads and writes, but now they're the same.)
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1837
was just saying "invalid memory access").
Added a regression test for this, for memcheck and addrcheck. Also made
Addrcheck use Memcheck's fprw regtest. Was able to remove the not-very-useful
'true' test for Addrcheck now that it has a couple of real tests.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1815
from skin's view, replacing all instances with ThreadId. Much cleaner. Had to
change the way VG_(get_ExeContext)() worked a little. Changed the core/skin
major interface because this breaks the old version. Also fixed a few minor
related things here and there.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1782
problem which caused the leak checker to misbehave following recent
PLT-bypass workaround.
In short, it is an error to announce to the skin, segments found which
belong to the low-level memory manager, because the skin may then mark
them as accessible to the client. This is wrong, and the client
should only acquire accessible memory via malloc etc and stack
movement. Now we carefully avoid mentioning any segment belonging to
the low level memory manager.
Take the opportunity to improve VG_(within_m_state_static) so that it
also detects pointers within the thread table. This can reduce the
number of blocks the leak checker spuriously thinks are still
reachable.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1751
a way consistent with the position of the register field in the
instruction. In Intel encoding parlance, the G register is in bits
5,4,3 and the E register is bits 2,1,0, and so we adopt this scheme
consistently. Considering how much confusion this has caused me in
this recent bout of SSE hacking, consistent renaming can only be a
good thing. It makes it a lot easier to figure out if parts of the
SSE handling machinery are correct, or not.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1698
- Fix bug in implementation of MOVD (mmxreg <--> ireg). This
fixes various segfaults and strange behaviour.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1695
for skins.
Changed lackey to print out the exit code.
Changed AUTOMAKE_OPTIONS back to 1.5 (whoops)
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1538
The first returns the number of errors found so far, and is a core request.
The second returns the number of bytes found
reachable/dubious/leaked/suppressed by all leak checks so far, for Memcheck and
Addrcheck.
Both are useful for using Valgrind in regression test suites where multiple
tests are present in a single file -- one can run Valgrind with no output
(using --logfile-fd=-1) and use the requests after each test to determine if
any errors happened.
Had to rename and make public vg_n_errs_found --> VG_(n_errs_found) to do so.
Nb: leak errors are not counted as errors for the purposes of
VALGRIND_COUNT_ERRORS. This was decided as the best thing to do after
discussion with Olly Betts, who original suggested these changes.
Pulled out common client request code shared between Memcheck and Addrcheck.
Added a regression test for this.
Added some documentation too.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1533
overview
-----------------------------------------------------------------------------
Previously Valgrind had its own versions of malloc() et al that replaced
glibc's. This is necessary for various reasons for Memcheck, but isn't needed,
and was actually detrimental, to some other skins. I never managed to treat
this satisfactorily w.r.t the core/skin split.
Now I have. If a skin needs to know about malloc() et al, it must provide its
own replacements. But because this is not uncommon, the core provides a module
vg_replace_malloc.c which a skin can link with, which provides skeleton
definitions, to reduce the amount of work a skin must do. The skeletons handle
the transfer of control from the simd CPU to the real CPU, and also the
--alignment, --sloppy-malloc and --trace-malloc options. These skeleton
definitions subsequently call functions SK_(malloc), SK_(free), etc, which the
skin must define; in these functions the skin can do the things it needs to do
about tracking heap blocks.
For skins that track extra info about malloc'd blocks -- previously done with
ShadowChunks -- there is a new file vg_hashtable.c that implements a
generic-ish hash table (using dodgy C-style inheritance using struct overlays)
which allows skins to continue doing this fairly easily.
Skins can also replace other functions too, eg. Memcheck has its own versions
of strcpy(), memcpy(), etc.
Overall, it's slightly more work now for skins that need to replace malloc(),
but other skins don't have to use Valgrind's malloc(), so they're getting a
"purer" program run, which is good, and most of the remaining rough edges from
the core/skin split have been removed.
-----------------------------------------------------------------------------
details
-----------------------------------------------------------------------------
Moved malloc() et al intercepts from vg_clientfuncs.c into vg_replace_malloc.c.
Skins can link to it if they want to replace malloc() and friends; it does
some stuff then passes control to SK_(malloc)() et al which the skin must
define. They can call VG_(cli_malloc)() and VG_(cli_free)() to do the actual
allocation/deallocation. Redzone size for the client (the CLIENT arena) is
specified by the static variable VG_(vg_malloc_redzone_szB).
vg_replace_malloc.c thus represents a kind of "mantle" level service.
To get automake to build vg_replace_malloc.o, had to resort to a similar trick
as used for the demangler -- ask for a "no install" library (which is never
used) to be built from it.
Note that all malloc, calloc, realloc, builtin_new, builtin_vec_new, memalign
are now aware of --alignment, when running on simd CPU or real CPU.
This means the new_mem_heap, die_mem_heap, copy_mem_heap and ban_mem_heap
events no longer exist, since the core doesn't control malloc() any more, and
skins can watch for these events themselves.
This required moving all the ShadowChunk stuff out of the core, which meant
the sizeof_shadow_block ``need'' could be removed, yay -- it was a horrible
hack. Now ShadowChunks are done with a generic HashTable type, in
vg_hashtable.c, which skins can "inherit from" (in a dodgy C-only fashion by
using structs with similar layouts). Also, the free_list stuff was all moved
as a part of this. Also, VgAllocKind was moved out of core into
Memcheck/Addrcheck and renamed MAC_AllocKind.
Moved these options out of core into vg_replace_malloc.c:
--trace-malloc
--sloppy-malloc
--alignment
The alternative_free ``need'' could go, too, since Memcheck is now in complete
control of free(), yay -- another horribility.
The bad_free and free_mismatch events could go too, since they're now not
detected by core, yay -- yet another horribility.
Moved malloc() et al wrappers for Memcheck out of vg_clientmalloc.c into
mac_malloc_wrappers.c. Helgrind has its own wrappers now too.
Introduced VG_USERREQ__CLIENT_CALL[123] client requests. When a skin function
is operating on the simd CPU, this will call a given function and run it on the
real CPU. The macros VG_NON_SIMD_CALL[123] in valgrind.h present a cleaner
interface to actually use. Also introduce analogues of these that pass 'tst'
from the scheduler as the first arg to the called function -- needed for
MC_(client_malloc)() et al.
Fiddled with USERREQ_{MALLOC,FREE} etc. in vg_scheduler.c; they call
SK_({malloc,free})() which by default call VG_(cli_malloc)() -- can't call
glibc's malloc() here. All the other default SK_(calloc)() etc. instantly
panic; there's a lock variable to ensure that the default SK_({malloc,free})()
are only called from the scheduler, which prevents a skin from forgetting to
override SK_({malloc,free})(). Got rid of the unused USERREQ_CALLOC,
USERREQ_BUILTIN_NEW, etc.
Moved special versions of strcpy/strlen, etc, memcpy() and memchr() into
mac_replace_strmem.c -- they are only necessary for memcheck, because the
hyper-optimised normal glibc versions confuse it, and for memcpy() etc. overlap
checking.
Also added dst/src overlap checks to strcpy(), memcpy(), strcat(). They are
reported not as proper errors, but just with single line warnings, as for silly
args to malloc() et al; this is mainly because they're on the simulated CPU
and proper error handling would be a pain; hopefully they're rare enough to
not be a problem. The strcpy check is done after the copy, because it would
require counting the length of the string beforehand. Also added strncpy() and
strncat(), which have overlap checks too. Note that addrcheck doesn't do
overlap checking.
Put USERREQ__LOGMESSAGE in vg_skin.h to do the overlap check error messages.
After removing malloc() et al and strcpy() et al out of vg_clientfuncs.c, moved
the remaining three things (sigsuspend, VG_(__libc_freeres_wrapper),
__errno_location) into vg_intercept.c, since it contains things that run on the
simulated CPU too. Removed vg_clientfuncs.c altogether.
Moved regression test "malloc3" out of corecheck into memcheck, since corecheck
no longer looks for silly (eg. negative) args to malloc().
Removed the m_eip, m_esp, m_ebp fields from the `Error' type. They were being
set up, and then read immediately only once, only if GDB attachment was done.
So now they're just being held in local variables. This saves 12 bytes per
Error.
Made replacement calloc() check for --sloppy-malloc; previously it didn't.
Added "silly" negative size arg check to realloc(), it didn't have one.
Changed VG_(read_selfprocmaps)() so it can parse the file directly, or from a
previously read buffer. Buffer can be filled with the new
VG_(read_selfprocmaps_contents)(). Using this at start-up to snapshot
/proc/self/maps before the skins do anything, and then parsing it once they
have done their setup stuff. Skins can now safely call VG_(malloc)() in
SK_({pre,post}_clo_init)() without the mmap'd superblock erroneously being
identified as client memory.
Changed the --help usage message slightly, now divided into four sections: core
normal, skin normal, core debugging, skin debugging. Changed the interface for
the command_line_options need slightly -- now two functions, VG_(print_usage)()
and VG_(print_debug_usage)(), and they do the printing themselves, instead of
just returning a string -- that's more flexible.
Removed DEBUG_CLIENTMALLOC code, it wasn't being used and was a pain.
Added a regression test testing leak suppressions (nanoleak_supp), and another
testing strcpy/memcpy/etc overlap warnings (overlap).
Also changed Addrcheck to link with the files shared with Memcheck, rather than
#including the .c files directly.
Commoned up a little more shared Addrcheck/Memcheck code, for the usage
message, and initialisation/finalisation.
Added a Bool param to VG_(unique_error)() dictating whether it should allow
GDB to be attached; for leak checks, because we don't want to attach GDB on
leak errors (causes seg faults). A bit hacky, but it will do.
Had to change lots of the expected outputs from regression files now that
malloc() et al are in vg_replace_malloc.c rather than vg_clientfuncs.c.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1524
neatens other things up.
Also, it adds the --gen-suppressions option for automatically generating
suppressions for each error.
Note that it changes the core/skin interface:
SK_(dup_extra_and_update)() is replaced by SK_(update_extra)(), and
SK_(get_error_name)() and SK_(print_extra_suppression_info)() are added.
-----------------------------------------------------------------------------
details
-----------------------------------------------------------------------------
Removed ac_common.c -- it just #included another .c file; moved the
#include into ac_main.c.
Introduced "mac_" prefixes for files shared between Addrcheck and Memcheck,
to make it clearer which code is shared. Also using a "MAC_" prefix for
functions and variables and types that are shared. Addrcheck doesn't see
the "MC_" prefix at all.
Factored out almost-identical mc_describe_addr() and describe_addr()
(AddrCheck's version) into MAC_(describe_addr)().
Got rid of the "pp_ExeContext" closure passed to SK_(pp_SkinError)(), it
wasn't really necessary.
Introduced MAC_(pp_shared_SkinError)() for the error printing code shared by
Addrcheck and Memcheck. Fixed some bogus stuff in Addrcheck error messages
about "uninitialised bytes" (there because of an imperfect conversion from
Memcheck).
Moved the leak checker out of core (vg_memory.c), into mac_leakcheck.c.
- This meant the hacky way of recording Leak errors, which was different to
normal errors, could be changed to something better: introduced a
function VG_(unique_error)(), which unlike VG_(maybe_record_error)() just
prints the error (unless suppressed) but doesn't record it. Used for
leaks; a much better solution all round as it allowed me to remove a lot
of almost-identical code from leak handling (is_suppressible_leak(),
leaksupp_matches_callers()).
- As part of this, changed the horrible SK_(dup_extra_and_update) into the
slightly less horrible SK_(update_extra), which returns the size of the
`extra' part for the core to duplicate.
- Also renamed it from VG_(generic_detect_memory_leaks)() to
MAC_(do_detect_memory_leaks). In making the code nicer w.r.t suppressions
and error reporting, I tied it a bit more closely to Memcheck/Addrcheck,
and got rid of some of the args. It's not really "generic" any more, but
then it never really was. (This could be undone, but there doesn't seem
to be much point.)
STREQ and STREQN were #defined in several places, and in two different ways.
Made global macros VG_STREQ, VG_CLO_STREQ and VG_CLO_STREQN in vg_skin.h.
Added the --gen-suppressions code. This required adding the functions
SK_(get_error_name)() and SK_(print_extra_suppression_info)() for skins that
use the error handling need.
Added documentation for --gen-suppressions, and fixed some other minor document
problems.
Various other minor related changes too.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1517
overview
-----------------------------------------------------------------------------
This commit introduces an optimisation that speeds up Memcheck by roughly
-3 -- 28%, and Addrcheck by 1 -- 36%, at least for the SPEC2000 benchmarks on
my 1400MHz Athlon.
Basic idea: that handling of A/V bit updates on %esp-adjustments was quite
sub-optimal -- for each "PUT ESP", a function was called that computed the
delta from the old and new ESPs, and then called a looping function to deal
with it.
Improvements:
1. most of the time, the delta can be seen from the code. So there's no need
to compute it.
2. when the delta is known, we can directly call a skin function to handle it.
3. we can specialise for certain common cases (eg. +/- 4, 8, 12, 16, 32),
including having unrolled loops for these.
This slightly bloats UCode because of setting up args for the call, and for
updating ESP in code (previously was done in the called C function). Eg. for
`date' the code expansion ratio goes from 14.2 --> 14.6. But it's much faster.
Note that skins don't have to use the specialised cases, they can just
define the ordinary case if they want; the specialised cases are only used
if present.
-----------------------------------------------------------------------------
details
-----------------------------------------------------------------------------
Removed addrcheck/ac_common.c, put its (minimal) contents in ac_main.c.
Updated the major interface version, because this change isn't binary
compatible with the old core/skin interface.
Removed the hooks {new,die}_mem_stack_aligned, replaced with the better
{new,die}_mem_stack_{4,8,12,16,32}. Still have the generic {die,new}_mem_stack
hooks. These are called directly from UCode, thanks to a new pass that occurs
between instrumentation and register allocation (but only if the skin uses
these stack-adjustment hooks). VG_(unknown_esp_update)() is called from UCode
for the generic case; it determines if it's a stack switch, and calls the
generic {new,die}_stack_mem hooks accordingly. This meant
synth_handle_esp_assignment() could be removed.
The new %esp-delta computation phase is in vg_translate.c.
In Memcheck and Addrcheck, added functions for updating the A and V bits of a
single aligned word and a single aligned doubleword. These are called from the
specialised functions new_mem_stack_4, etc. Could remove the one for the old
hooks new_mem_stack_aligned and die_mem_stack_aligned.
In mc_common.h, added a big macro containing the definitions of new_mem_stack_4
et al. It's ``instantiated'' separately by Memcheck and Addrcheck. The macro
is a bit klugey, but I did it that way because speed is vital for these
functions, so eg. a function pointer would have slowed things down.
Updated the built-in profiling events appropriately for the changes (removed
one old event, added a new one; finding their names is left as an exercise for
the reader).
Fixed memory event profiling in {Addr,Mem}check, which had rotted.
A few other minor things.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1510
interim. All hats off to Graydon Hoare for this, plus to whoever
devised the LD_ASSUME_KERNEL trapdoor.
This does not provide NPTL support. Instead it turns out we can ask
for the old LinuxThreads interface to be used (wonderful!)
Other than that we have to deal with kernels with SYSINFO pages at the
top of memory. No big deal, apparently.
MERGE TO STABLE
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1508
