they produce an incomplete backtrace. Added exp-kfail files to capture the
results with the incomplete backtraces. Updated the generic exp files.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@12092
I changed it to just filter the entire stack trace out for these errors (both
normal and XML cases). The syscall name is still present in the error
string. This allows a one or more alternative expected output files to be
removed for several tests, which is A Very Good Thing.
Also, I killed filter_test_paths because it was weird and clumsy and the
above change obviated most of its use and the remaining effects could be
achieved in other ways.
Also, I fixed up the scalar* tests a little and they now pass on my machine,
(and hopefully at least some other machines) for the first time ever!
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@9178
overhaul of the thread support. Many things are now probably broken,
but at least with --tool=none, simple and not-so-simple threaded and
non-thread programs work.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@3265
- All memory-related errors are now clear whether they are caused by
unaddressable or uninitialised memory. (Previously, writes were
clearly addressability errors, but reads could be either.) Mostly
done by replacing the 'isWrite' field in MAC_Error with 'isUnaddr'.
Also, mc_check_readable() now indicates not just if an error occurred,
but what kind of error (ie. addressability or definedness).
- Put machinery into place in the core to inform tools when registers
are being read by the core -- ie. a 'pre_reg_read' event. Most
notably, this facilitates syscall scalar arg definedness checking for
Memcheck. Currently this is only working for read(), write(), exit()
and exit_group(), but it will be extended as the syscalls are
overhauled as part of the arch-abstraction work.
A consequence of this is that the ParamErr messages have changed. This:
Syscall param write(buf) contains uninitialised byte(s)
now means that the pointer 'buf' is partially undefined. If the memory
pointed to by 'buf' is partially undefined or unaddressable, it says one of:
Syscall param write(buf) points to uninitialised byte(s)
Syscall param write(buf) points to unaddressable byte(s)
The docs have been updated accordingly.
I also added a couple of regression tests.
These two change sare notable for being the first improvements to
Memcheck's checking/errors in a long time.
I also folded mc_clientreqs.c into mc_main.c, which saves exporting a
whole bunch of things that are not used anywhere else.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2949
choosing the longest symbol, choose the longest ignoring any of the libc
junk prefixes like __libc_, __, __GI_*, etc. This makes the symbol
presented to the user in messages and used in *.supp files more consistent
and comprehensible.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2114
indented one space; previously it was mixed, but Memcheck/Addrcheck indented
"Address" lines 3, which made them hard to see in the stack trace.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2021
option --show-below-main is on. It's on by default. It also affects
suppressions generated with --gen-suppressions=yes. Updated reg tests
accordingly.
Also updated docs for this. And added some missing command-line args to docs.
Also compartmentalised the options a little in the docs, and rearranged the
order of options in the usage message, in anticipation of a bigger
rearrangement that will be necessary soon -- to distinguish options used by all
skins from those used by error-checking skins, to skin-specific ones.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@2020
under some setups.
Also fixed problem with Cachegrind tests, by filtering out P4s'
warning message.
Also fixed 'mismatches'.
------------------------------------------------------------
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1616
overview
-----------------------------------------------------------------------------
Previously Valgrind had its own versions of malloc() et al that replaced
glibc's. This is necessary for various reasons for Memcheck, but isn't needed,
and was actually detrimental, to some other skins. I never managed to treat
this satisfactorily w.r.t the core/skin split.
Now I have. If a skin needs to know about malloc() et al, it must provide its
own replacements. But because this is not uncommon, the core provides a module
vg_replace_malloc.c which a skin can link with, which provides skeleton
definitions, to reduce the amount of work a skin must do. The skeletons handle
the transfer of control from the simd CPU to the real CPU, and also the
--alignment, --sloppy-malloc and --trace-malloc options. These skeleton
definitions subsequently call functions SK_(malloc), SK_(free), etc, which the
skin must define; in these functions the skin can do the things it needs to do
about tracking heap blocks.
For skins that track extra info about malloc'd blocks -- previously done with
ShadowChunks -- there is a new file vg_hashtable.c that implements a
generic-ish hash table (using dodgy C-style inheritance using struct overlays)
which allows skins to continue doing this fairly easily.
Skins can also replace other functions too, eg. Memcheck has its own versions
of strcpy(), memcpy(), etc.
Overall, it's slightly more work now for skins that need to replace malloc(),
but other skins don't have to use Valgrind's malloc(), so they're getting a
"purer" program run, which is good, and most of the remaining rough edges from
the core/skin split have been removed.
-----------------------------------------------------------------------------
details
-----------------------------------------------------------------------------
Moved malloc() et al intercepts from vg_clientfuncs.c into vg_replace_malloc.c.
Skins can link to it if they want to replace malloc() and friends; it does
some stuff then passes control to SK_(malloc)() et al which the skin must
define. They can call VG_(cli_malloc)() and VG_(cli_free)() to do the actual
allocation/deallocation. Redzone size for the client (the CLIENT arena) is
specified by the static variable VG_(vg_malloc_redzone_szB).
vg_replace_malloc.c thus represents a kind of "mantle" level service.
To get automake to build vg_replace_malloc.o, had to resort to a similar trick
as used for the demangler -- ask for a "no install" library (which is never
used) to be built from it.
Note that all malloc, calloc, realloc, builtin_new, builtin_vec_new, memalign
are now aware of --alignment, when running on simd CPU or real CPU.
This means the new_mem_heap, die_mem_heap, copy_mem_heap and ban_mem_heap
events no longer exist, since the core doesn't control malloc() any more, and
skins can watch for these events themselves.
This required moving all the ShadowChunk stuff out of the core, which meant
the sizeof_shadow_block ``need'' could be removed, yay -- it was a horrible
hack. Now ShadowChunks are done with a generic HashTable type, in
vg_hashtable.c, which skins can "inherit from" (in a dodgy C-only fashion by
using structs with similar layouts). Also, the free_list stuff was all moved
as a part of this. Also, VgAllocKind was moved out of core into
Memcheck/Addrcheck and renamed MAC_AllocKind.
Moved these options out of core into vg_replace_malloc.c:
--trace-malloc
--sloppy-malloc
--alignment
The alternative_free ``need'' could go, too, since Memcheck is now in complete
control of free(), yay -- another horribility.
The bad_free and free_mismatch events could go too, since they're now not
detected by core, yay -- yet another horribility.
Moved malloc() et al wrappers for Memcheck out of vg_clientmalloc.c into
mac_malloc_wrappers.c. Helgrind has its own wrappers now too.
Introduced VG_USERREQ__CLIENT_CALL[123] client requests. When a skin function
is operating on the simd CPU, this will call a given function and run it on the
real CPU. The macros VG_NON_SIMD_CALL[123] in valgrind.h present a cleaner
interface to actually use. Also introduce analogues of these that pass 'tst'
from the scheduler as the first arg to the called function -- needed for
MC_(client_malloc)() et al.
Fiddled with USERREQ_{MALLOC,FREE} etc. in vg_scheduler.c; they call
SK_({malloc,free})() which by default call VG_(cli_malloc)() -- can't call
glibc's malloc() here. All the other default SK_(calloc)() etc. instantly
panic; there's a lock variable to ensure that the default SK_({malloc,free})()
are only called from the scheduler, which prevents a skin from forgetting to
override SK_({malloc,free})(). Got rid of the unused USERREQ_CALLOC,
USERREQ_BUILTIN_NEW, etc.
Moved special versions of strcpy/strlen, etc, memcpy() and memchr() into
mac_replace_strmem.c -- they are only necessary for memcheck, because the
hyper-optimised normal glibc versions confuse it, and for memcpy() etc. overlap
checking.
Also added dst/src overlap checks to strcpy(), memcpy(), strcat(). They are
reported not as proper errors, but just with single line warnings, as for silly
args to malloc() et al; this is mainly because they're on the simulated CPU
and proper error handling would be a pain; hopefully they're rare enough to
not be a problem. The strcpy check is done after the copy, because it would
require counting the length of the string beforehand. Also added strncpy() and
strncat(), which have overlap checks too. Note that addrcheck doesn't do
overlap checking.
Put USERREQ__LOGMESSAGE in vg_skin.h to do the overlap check error messages.
After removing malloc() et al and strcpy() et al out of vg_clientfuncs.c, moved
the remaining three things (sigsuspend, VG_(__libc_freeres_wrapper),
__errno_location) into vg_intercept.c, since it contains things that run on the
simulated CPU too. Removed vg_clientfuncs.c altogether.
Moved regression test "malloc3" out of corecheck into memcheck, since corecheck
no longer looks for silly (eg. negative) args to malloc().
Removed the m_eip, m_esp, m_ebp fields from the `Error' type. They were being
set up, and then read immediately only once, only if GDB attachment was done.
So now they're just being held in local variables. This saves 12 bytes per
Error.
Made replacement calloc() check for --sloppy-malloc; previously it didn't.
Added "silly" negative size arg check to realloc(), it didn't have one.
Changed VG_(read_selfprocmaps)() so it can parse the file directly, or from a
previously read buffer. Buffer can be filled with the new
VG_(read_selfprocmaps_contents)(). Using this at start-up to snapshot
/proc/self/maps before the skins do anything, and then parsing it once they
have done their setup stuff. Skins can now safely call VG_(malloc)() in
SK_({pre,post}_clo_init)() without the mmap'd superblock erroneously being
identified as client memory.
Changed the --help usage message slightly, now divided into four sections: core
normal, skin normal, core debugging, skin debugging. Changed the interface for
the command_line_options need slightly -- now two functions, VG_(print_usage)()
and VG_(print_debug_usage)(), and they do the printing themselves, instead of
just returning a string -- that's more flexible.
Removed DEBUG_CLIENTMALLOC code, it wasn't being used and was a pain.
Added a regression test testing leak suppressions (nanoleak_supp), and another
testing strcpy/memcpy/etc overlap warnings (overlap).
Also changed Addrcheck to link with the files shared with Memcheck, rather than
#including the .c files directly.
Commoned up a little more shared Addrcheck/Memcheck code, for the usage
message, and initialisation/finalisation.
Added a Bool param to VG_(unique_error)() dictating whether it should allow
GDB to be attached; for leak checks, because we don't want to attach GDB on
leak errors (causes seg faults). A bit hacky, but it will do.
Had to change lots of the expected outputs from regression files now that
malloc() et al are in vg_replace_malloc.c rather than vg_clientfuncs.c.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1524
- For all except `trivialleak', expected output lines like this:
by 0x........: __libc_start_main@@GLIBC_2.0 (...libc...)
were changed to look like this:
by 0x........: (within /.../tests/supp2)
This change was caused by a change about 3 weeks ago, but we couldn't work
out exactly which one. It does not seem unreasonable, though.
- For `malloc1' and `trivialleak', one of the line numbers changed -- they
are now correct instead of off by one -- thanks to Jeremy F's recent patch
which subtracts one from return addresses (for exactly this reason).
Now they all pass again except `tronical', as expected.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@1328
