Line numbers should correctly reflect all instructions belonging to a source line,
regardless of is_stmt value. Previously only instructions covered by
'is_stmt = 1' were attributed to a source line.
Fixes BZ#356044
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@15741
evaluation starts. For DW_CFA_val_expression and DW_CFA_expression
doing so is correct, but not for DW_CFA_def_cfa_expression.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@15160
Valgrind aspects, to match vex r3124.
See bug 339778 - Linux/TileGx platform support to Valgrind
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@15080
that once an element has been allocated and added to the pool it must
not be modified afterwards. See the documentation in pub_tool_deduppoolalloc.h
The rest of the patch is ripple.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14654
files in the dwarf3 reader.
Basically, the change consists in replacing in the DiInlLoc struct
const HChar* filename; /* caller source filename */
by
UInt fndn_ix; /* index in di->fndnpool of caller source
dirname/filename */
A similar change is done in DiVariable struct, as the
read_filename_Table code is shared between the inline info reader
and the varinfo reader.
Note however that outputting dirname in variable description
is not done. Unclear if that is desired or not.
It should be trivially doable however.
Replacing filename by fndn_ix implies a bunch of semi-mechanical
changes.
The code to read the directory names is in the new function
static
XArray* read_dirname_xa (struct _DebugInfo* di, const HChar *compdir,
Cursor *c,
Bool td3 )
Note that readdwarf.c and readdwarf3.c have significant duplicated
logic. Would be nice to integrate these 2 dwarf readers in one
single reader. This function is directly inspired from
an equivalent piece of code in readdwarf.c.
Modified memcheck/tests/varinfo5.vgtest to test the dirname appears
in the inlined functions.
Impact on memory is neglectable (a few Kb on a big executable).
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14245
to add PPC64 LE support. The other two patches can be found in Bugzillas
334834 and 334836. The commit does not have a VEX commit associated with it.
POWER PC, add initial Little Endian support
The IBM POWER processor now supports both Big Endian and Little Endian.
This patch renames the #defines with the name ppc64 to ppc64be for the BE
specific code. This patch adds the Little Endian #define ppc64le to the
Additionally, a few functions are renamed to remove BE from the name if the
function is used by BE and LE. Functions that are BE specific have BE put
in the name.
The goals of this patch is to make sure #defines, function names and
variables consistently use PPC64/ppc64 if it refers to BE and LE,
PPC64BE/ppc64be if it is specific to BE, PPC64LE/ppc64le if it is LE
specific. The patch does not break the code for PPC64 Big Endian.
The test files memcheck/tests/atomic_incs.c, tests/power_insn_available.c
and tests/power_insn_available.c are also updated to the new #define
definition for PPC64 BE.
Signed-off-by: Carl Love <carll@us.ibm.com>
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14238
On a big executable, the trunk needs:
dinfo: 134873088/71438336 max/curr mmap'd, 134607808/66717872 max/curr
With the patch, we have:
dinfo: 99065856/56836096 max/curr mmap'd, 97883776/51663656 max/curr
So, peak dinfo memory decreases by about 36Mb, and final by 15Mb.
(for info, valgrind 3.9.0 uses
dinfo: 158941184/109666304 max/curr mmap'd, 156775944/107590656 max/curr
So, compared to 3.9.0, dinfo peak decreases by about 40%, and the final
memory is divided by more than 2).
The memory decrease is obtained by:
* using a dedup pool to store filename/dirname pair for the loctab source/line
information.
As typically, there is not a lot of such pairs, typically a UShort is
good enough to identify a fn/dn pair in a dedup pool.
To avoid losing memory due to alignment, the fndn indexes are stored
in a "parallel" array to the DiLoc loctab array, with entries having
1, or 2 or 4 bytes according to the nr of fn/dn pairs in the dedup pool.
See priv_storage.h comments for details.
(there was a extensible WordArray local implementation in readdwarf.c.
As with this change, we use an xarray, the local implementation was
removed).
* the memory needed for --read-inline-info is slightly decreased (-2Mb)
by removing the (unused) dirname from the DiInlLoc struct.
Handling dirname for inlined function caller implies to rework
the dwarf3 parser read_filename_table common to the var and inlinfo parser.
Waiting for this to be done, the dirname component is removed from DiInlLoc.
* the stabs reader (readstabs.c) is broken since 3.9.0.
For this change, the code has been updated to make it compile with the new
DiLoc/FnDn dedup pool. As the code is completely broken, a vg_assert(0)
has been put at the begin of the stabs reader.
* the pdb reader (readpdb.c) has been trivially updated and should still work.
It has not been tested (how do we test this ?).
A follow-up patch will be done to avoid doing too many calls to
ML_(addFnDn) : instead of having one call per ML_(addLineInfo), one
should have a single call done when reading the filename table.
This has also be tested in an outer/inner setup, to verify no
memory leak/bugs.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14158
On a big executable, the trunk needs:
dinfo: 155844608/106737664 max/curr mmap'd 155572624/102276760 max/curr
With the patch, we have:
dinfo: 134873088/70389760 max/curr mmap'd 134607808/66717512 max/curr
So, peak dinfo memory decreases by 21Mb, and final by 36Mb.
The memory decrease is obtained by:
* using a dedup pool to store the machine dependent part (cfsi_m)
of the cfsi information as this information is highly duplicated.
For x86 and arm64, the duplication factor of cfsi machine dependent
part is very high (up to a factor 60).
For arm64, it is more like a factor 3.
A 'variable size' (1, 2 or 4 bytes) is automatically used to identify
the cfsi_m, if there is less than or more than 255/64K different cfsi_m.
* not storing explicitely the length of a range for which a cfsi_m
is to be used: in a large majority of the cases, ranges are
consecutive, and so the end of a range is just one byte before
the start of the next range.
So, we do not store the length of the ranges.
If there is a hole between 2 ranges, the hole is stored explicitely
as a range in which we have no cfsi_m information.
On x86 and amd64, we have quite some holes (something like one hole
every 7 cfsi). On arm64, we have very few holes (less than one hole
every 50 cfsi).
Even with the nr of holes on x86/amd64, it is more memory efficient
to store the holes rather than to store the length of each cfsi.
* Merging consecutive ranges that have the same cfsi_m info:
Many cfsi are "mergeable": there is no hole between 2 cfsi, and their
machine dependent part is identical
(I guess the unwind info needed by valgrind is subset of the full
unwind info, and so, the cfsi entries are not merged by the compiler,
but can be merged for simple unwind). Depending on the platform
(x86, amd64, arm64) and of the library/object file, we can have a
significant nr of mergeable entries.
The patch is not very small, but a lot is mechanical changes.
The patch has been compiled and tested on x86/amd64/ppc32/ppc64
(but ppc does not use cfsi so that just verifies it compiles).
It has been compiled on arm64, and "tested" by launching valgrind on
one executable.
It has not been compiled on s390 and mips.
With some luck, maybe it will compile on these platforms.
And if that uses the whole provision of luck for 2014, it might even work
on these platforms :).
If it does not compile, the fix should be straightforward.
Runtime problems might be more tricky (but arm64 "worked out of the box"
once x86/amd64 were ok).
This has also be tested in an outer/inner setup, to verify no memory leak/bugs.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14129
Reading header length and values in external line info was incorrect at
some places as it used offsets based on dw64 that came from .debug_info.
Instead, offsets should be calculated based on is64 from .debug_line.
This issue surfaced in MIPS64 port, and it was discussed at:
https://bugs.kde.org/show_bug.cgi?id=313267#c20
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13373
Bug #305513. We should only read the first DIE of a compilation unit.
Each compilation unit header is followed by a single DW_TAG_compile_unit
(or DW_TAG_partial_unit, but those aren't important here) and its children.
There is no reason to read any of the children at this point. If the first
DIE isn't a DW_TAG_compile_unit we are done, none of the child DIEs will
provide any useful information.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13369
Bug #305513 contained a patch for some extra robustness checks. But
the real cause of crashing in the read_unitinfo_dwarf2 DWARF reader
seemed to have been this issue where DWARF version 2 DWZ partial_units
were read and DW_FORM_ref_addr had an unexpected size. This combination
is rare. DWARF version 4 is the current default version of GCC.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13367
Necessary changes to Valgrind to support MIPS64LE on Linux.
Minor cleanup/style changes embedded in the patch as well.
The change corresponds to r2687 in VEX.
Patch written by Dejan Jevtic and Petar Jovanovic.
More information about this issue:
https://bugs.kde.org/show_bug.cgi?id=313267
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13292
functions that do FP arithmetic. This is due to the Dwarf3 CFI
mentioning Dwarf registers above N_CFI_REGS, in particular FP
registers, which have values of about 80. This fixes the problem by
increasing N_CFI_REGS to a level that covers all known registers.
(n-i-bz)
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@12393
and use read_Type routines instead as they work rather better on strict
aligned (or semi-strict a la ARM) machines. Fixes#282527.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@12083
contains a bunch of fields which are used as a very simple state
machine that observes mmap calls and decides when to read debuginfo
for the associated file. This change moves these fields into their
own structure, struct _DebugInfoFSM, for cleanness, so as to make it
clear they have a common purpose.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@12041
info created by LLVM 2.9 work properly. As per long discussion in
#272189, this isn't actually possible -- LLVM 2.9 creates bogus line
number info, and the bogusness can't be worked around at the Valgrind
end.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@11738
