Sync VEX/LICENSE.GPL with top-level COPYING file. We used 3 different
addresses for writing to the FSF to receive a copy of the GPL. Replace
all different variants with an URL <http://www.gnu.org/licenses/>.
The following files might still have some slightly different (L)GPL
copyright notice because they were derived from other programs:
- files under coregrind/m_demangle which come from libiberty:
cplus-dem.c, d-demangle.c, demangle.h, rust-demangle.c,
safe-ctype.c and safe-ctype.h
- coregrind/m_demangle/dyn-string.[hc] derived from GCC.
- coregrind/m_demangle/ansidecl.h derived from glibc.
- VEX files for FMA detived from glibc:
host_generic_maddf.h and host_generic_maddf.c
- files under coregrin/m_debuginfo derived from LZO:
lzoconf.h, lzodefs.h, minilzo-inl.c and minilzo.h
- files under coregrind/m_gdbserver detived from GDB:
gdb/signals.h, inferiors.c, regcache.c, regcache.h,
regdef.h, remote-utils.c, server.c, server.h, signals.c,
target.c, target.h and utils.c
Plus the following test files:
- none/tests/ppc32/testVMX.c derived from testVMX.
- ppc tests derived from QEMU: jm-insns.c, ppc64_helpers.h
and test_isa_3_0.c
- tests derived from bzip2 (with embedded GPL text in code):
hackedbz2.c, origin5-bz2.c, varinfo6.c
- tests detived from glibc: str_tester.c, pth_atfork1.c
- test detived from GCC libgomp: tc17_sembar.c
- performance tests derived from bzip2 or tinycc (with embedded GPL
text in code): bz2.c, test_input_for_tinycc.c and tinycc.c
Changed a few %s or %pS into %ps in m_addrinfo.c
(based on code reading matching the pattern given in the bug report,
as there was no reproducer).
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@15753
address space manager. Callers should neither modify the string nor
free it (as the string resides is statically allocated memory). That
calls for a const HChar *
The type change exposed two bugs. One in m_addrinfo.c and one in
m_debuginfo.c. In both cases the returned string could possibly be freed later
on. So we need to strdup it first. Now fixed.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14886
segment if it is past the heap end
Describes specifically an address that is in the brk data segment
or in the 'reduced' (after brk reduction) section of the brk data segment.
Based on a patch from Ivo Raisr.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14833
anonymous or file mmap-ed segments and shared memory segments.
* pub_tool_addrinfo.h:
new AddrTag Addr_SegmentKind // Client segment (mapped memory)
new struct SegmentKind in AddrInfo
* m_addrinfo.c:
If address is still undescribed, try to describe by findinf a client segment.
* update various tests
* mc_errors.c:
add a call to VG_(clear_addrinfo) in MC_(pp_describe_addr)
as the memory allocated in the local AddrInfo has to be cleared once
info is printed.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14779
Two things:
- remove the buffer argument from VG_(DebugInfo_sect_kind)
- allocate AddrInfo::SectKind::objname dynamically
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14719
The functions VG_(get_filename) and VG_(get_filename_lineno) now return
a pointer to filename and directory name instead of copying them into
buffers passed in from the caller.
The returned strings are persistent as long as the DebugInfo to which
they belong is not discarded. The caller therefore needs to stash them
away as needed.
Function VG_(strncpy_safely) has been removed as it is no longer needed.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14668
This patch changes the interface and behaviour of VG_(demangle) and
VG_(maybe_Z_demangle). Instead of copying the demangled name into a
fixed sized buffer that is passed in from the caller (HChar *buf, Int n_buf),
the demangling functions will now return a pointer to the full-length
demangled name (HChar **result). It is the caller's responsiblilty to
make a copy if needed.
This change in function parameters ripples upward
- first: to get_sym_name
- then to the convenience wrappers
- VG_(get_fnname)
- VG_(get_fnname_w_offset)
- VG_(get_fnname_if_entry)
- VG_(get_fnname_raw)
- VG_(get_fnname_no_cxx_demangle)
- VG_(get_datasym_and_offset)
The changes in foComplete then forces the arguments of
- VG_(get_objname) to be changed as well
There are some issues regarding the ownership and persistence of
character strings to consider.
In general, the returned character string is owned by "somebody else"
which means the caller must not free it. Also, the caller must not
modify the returned string as it possibly points to read only memory.
Additionally, the returned string is not necessarily persistent. Here are
the scenarios:
- the returned string is a demangled function name in which case the
memory holding the string will be freed when the demangler is called again.
- the returned string hangs off of a DebugInfo structure in which case
it will be freed when the DebugInfo is discarded
- the returned string hangs off of a segment in the address space manager
in which case it may be overwritten when the segment is merged with
another segment
So the rule of thunb here is: if in doubt strdup the string.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14664
(reported by Florian)
Note that Addr_Undescribed will cause an assert if such
an undescribed addrinfo is pretty printed, as normally
such addrinfo should always be described before being pretty printed.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14558
Tool files shall use tl_assert not vg_assert.
Fix code accordingly.
Adapted check_headers_and_includes to make sure the code
stays clean in that respect.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14542
stackPos might be used uninitialised.
Silence gcc by assigning a value to stackPos.
This value must be overriden if a stack description is found.
The fact that the value is overriden is asserted.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14438
An address below the sp will be described as being on a stack, but below sp.
The stack for such an address is found in the registered stacks.
Also, if there is a guard page at the end of the stack (lowest address)
an address in this page will be described as being in thread guard page.
A guard page is recognised as being a page not readable/writable/executable.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14399
(using a fake 'one address' stack trace).
This a.o. can be used with the gdbsrv 'monitor v.info location 0x.....'
to compare gdb and valgrind address to source mapping.
Any tool that use pub_tool_addrinfo.h will also better descrive
text addresses.
No impact on tests, as there is no test testing 'segment' address
description :(
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14192
and stack address description.
* A race condition on an allocated block shows the stacktrace, but
does not show the thread # that allocated the block.
This patch adds the output of the thread # that allocated the block.
* The patch also fixes the confusion that might appear between
the core threadid and the helgrind thread nr in Stack address description:
A printed stack addrinfo was containing a thread id, while all other helgrind
messages are using (supposed to use) an 'helgrind thread #' which
is used in the thread announcement.
Basically, the idea is to let a tool set a "tool specific thread nr'
in an addrinfo.
The pretty printing of the addrinfo is then by preference showing this
thread nr (if it was set, i.e. different of 0).
Currently, only helgrind uses this addrinfo tnr.
Note: in xml mode, the output is matching the protocol description.
I.e., GUI should not be impacted by this change, if they properly implement
the xml protocol.
* Also, make the output produced by m_addrinfo consistent:
The message 'block was alloc'd at' is changed to be like all other
output : one character indent, and starting with an uppercase
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@14175
--read-var-info=yes is very memory and cpu intensive.
This patch ensures that even witout --read-var-info=yes that
the frame where the address point is reported in the address
description.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13991
of memcheck and helgrind in a common module:
pub_tool_addrinfo.h pub_core_addrinfo.h m_addrinfo.c
At the same time, the factorised code is made usable by other
tools also (and is used by the gdbserver command 'v.info location'
which replaces the helgrind 'describe addr' introduced 1 week ago
and which is now callable by all tools).
The new address description code can describe more addresses
(e.g. for memcheck, if the block is not on the free list anymore,
but is in an arena free list, this will also be described).
Similarly, helgrind address description can now describe more addresses
when --read-var-info=no is given (e.g. global symbols are
described, or addresses on the stack are described as
being on the stack, freed blocks in the arena free list are
described, ...).
See e.g. the change in helgrind/tests/annotate_rwlock.stderr.exp
or locked_vs_unlocked2.stderr.exp
The patch touches many files, but is basically a lot of improvements
in helgrind output files.
The code changes are mostly refactorisation of existing code.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@13965
